CRX-10iA
Low-maintenance cobot — machine tending and sub-10kg assembly in tight manufacturing.
Opens FANUC's own product page in a new tab. Robofy is independent — we research and compare, but pricing and orders happen on the manufacturer's site.
Turn robot research into a buying decision.
A buyer-facing summary of site fit, ROI confidence, supplier readiness, and the next action Robofy should capture.
Use this moment to capture buying intent before the user drifts back into research mode.
Directional estimate based on price, labor offset, and readiness scores.
$45K - $58K
Available
How it stands in your space.
Side-by-side with a 180 cm adult, so you can feel the robot's footprint, height, and presence before it ever rolls in.
Compared with a 180 cm adult, CRX-10iA stands at approximately waist-to-chest height.
180 cm adult
Specifications
What this robot can do.
- Obstacle avoidance
- Multi-floor
- Elevator support
- Voice interaction
- Screen interaction
- Autonomous charging
- Fleet management
- Indoor
- Outdoor
Should you deploy it?
0–100 — higher is stronger, except where noted.
How operationally ready this robot is for production deployment today.
Confidence in the published ROI numbers — how likely the savings actually materialize.
Share of the human task this category can credibly offload.
Fit with your target environment — lighting, floor type, congestion.
Expected maintenance load and downtime risk. Lower is better.
Long-horizon strategic upside — where the platform points 3+ years out.
Buy if you run CNC-heavy or palletizing operations under 10 kg with FANUC ecosystem already in place. Skip if you need >10 kg payload or fast integration without reading manuals; eight-year maintenance window locks you in.
Opens FANUC's own product page in a new tab. Robofy is independent — we research and compare, but pricing and orders happen on the manufacturer's site.
When to deploy this.
- CNC machine tending — load/unload parts from spindles in 5–50-second cycles
- Carton palletizing — stack boxes under 10 kg to platform height (95" with external Z-axis)
- Assembly sub-contract — small-parts insertion, fastening in electronics or light manufacturing
When to skip it.
- 10 kg payload ceiling — any assembly requiring >10 kg per part disqualifies it; upgrade to CRX-20iA/L ($55k+)
- FANUC programming language (TP dialect) — steep learning curve if your team uses universal robots or Open-source stacks
- Limited reach variants — standard 1249 mm or long-arm 1418 mm only; no intermediate; foot-mounted only, no mobile platform
What's verified, what's estimated.
Robofy separates manufacturer-confirmed facts from operator estimates. Anything not yet press-sourced or supplier-confirmed is tagged so you can decide how much weight to give it.
Specifications and dimensions from FANUC official product pages (crx.fanucamerica.com, fanuc.eu) and FANUC America datasheet PDF. Pricing from Vention (2025 cost guide), Standard Bots (comparisons), and MachineToolProducts distributor listing; price range reflects USD MSRPs and reseller quotes circa May 2026. Zero-maintenance claim per official CRX series marketing. Payload, reach, weight, power, and IP67 rating verified across FANUC America, RBTX, and Unchained Robotics. Deployment readiness, ROI horizon, and labor-replacement scores are Robofy editorial estimates based on industry benchmarks and third-party cobot ROI reports. No third-party throughput or cycle-time benchmarks found; assessment based on payload and application fit.
- Deployment readinessInferred
- ROI clarityInferred
- Labor replacement potentialInferred
- Environment fitInferred
- Maintenance riskInferred
- Future potentialInferred
- Lease rangeEstimated
- MaturityEstimated
- Battery lifeEstimated
- NavigationEstimated
- CapabilitiesEstimated
- Price rangeSourcePress
- AvailabilitySourcePress
- PayloadSourcePress
- SpeedSourcePress
- DimensionsSourcePress
- Dimensions (mm)SourcePress
- WeightSourcePress
- ConnectivitySourcePress
From rollout to recharge.
- 01
Programmed patrol path
Operators record an inspection circuit through the site, marking sensor read points and risk zones.
- 02
Sensor sweep on schedule
Thermal, visual, and acoustic sensors capture readings on every patrol, indoors or outdoors.
- 03
Real-time alerts
Anomalies push to the on-call team's phone with timestamped imagery and location context.
- 04
Return & recharge
Short missions cycle quickly back to the dock; logs sync to the cloud for audit and trending.
Picture this robot in your floor plan.
Upload a photo or floor plan of your venue and we'll show this robot at scale — so you can feel its footprint, sight lines, and clearance before deployment.
Scene preview · arriving in Phase 2
Other paths worth comparing.
- Match42Pilot Ready
DobotAtomPrecision-class industrial humanoid for micro-assembly and beverage service in factories and cafés.
- Match89Deploy Now
- Match59Pilot Ready
- Match40Pilot Ready
Track this robot.
We use your information only to personalize robotics recommendations and updates you choose to receive.